Models

HDW-2000 Deck Repair

Free Estimates
1 to 3 Day Turn Around
Up to 6 Month Warranty

Is there a maintenance schedule for my HDW 2000 video recorder?

HDW 2000 Maintenance is performed periodically in order to preserve all functions in good working condition, Video equipment with mounted mechanism use wear parts, wear and deterioration will cause miscellaneous malfunctions. Dust, dirt and salt can also impair stable operation. It is important not to just perform repair at the time of breakdown, but also to perform suitable maintenance at regular intervals.

Maintenance scedule for HDW-2000 Video recorder

Operating Hours	500	1000	1500	300	3500	4000
Tape running surface cleaning
Rotary drum cleanining & Degouseing
Capstan bearing	--		--		--
Loading motor
Abnormal Sopunds	--		--		--
Breake_tension measurment	--		--		--
FWD/RVD torque measurment	--		--		--

What is operating hours vs guaranteed hours

Operating hours are based on the head rotation hours. Guaranteed hours are recommendation. It may depend on the temperature, humidity, quality of the tape or dust condition. Operating hours are listed as to the reference of maintenance. They do not mean guaranteed hours.

Adjustment?

Adjustment are performed by highly qualified engineers following adjustment are completed after most repairs are done.

Electrical Adjustmentss
Mechanical Adjustments

Minor Service	Major Service
Minor Repair and Service on Sony HDW-2000 is usually performed at 250 hours up to 500 hours depending on the environment used, such as dusty, sandy, windy salty (such as Shooting in the beach environment) and etc.	Major Repair and Service on Sony HDW-2000 is usually performed at 500 hours - 1000 hours. This includes Minor service Inspection, Alignment, Cleaning of most major and minor assemblies and replacement as necessary of all common wear parts.
Overall Cleaning Transport Cleaning Transport Alignment Drum Head Cleaning Tape Path, Tension,Switching position adjustment	Drum Head Assembly Tape Deck assembly Drum Bass Assembly Coaster (T) Block Assembly Pinch Roller Arm Assembly

Self-Diagnosis Code Table
	Symptom/State
01	Tape slacking is detected in the threading or unthreading operation.
02	Tape slacking or tape breaking is detected in the SEARCH, FF, or REW mode.
03	Tape slacking, tape breaking, or supply or take-up reel locking is detected in the REC or PLAY mode.
04	A malfunctional tape transport speed is detected in the FF or REW mode.
05	The malfunctional operation of the supply or take-up reel is detected during cassette insertion.
06	Excessive tape tension is detected in the REC or PLAY mode.
07	Malfunction of capstan motor is detected.
08	Malfunction of drum motor is detected.
09	Malfunction of threading or unthreading operation is detected.
0A	It is detected that the tape top processing is not completed in the threading mode.
10	Dew condensation is detected.
11	The tape top and tape end are detected simultaneously.
12	Malfunction of tape top sensor is detected.
13	Malfunction of tape end sensor is detected.
14	Malfunction of cooling fan motor is detected.
20	Malfunction of cassette compartment-up or down operation is detected.
21	Malfunction of movement of the reel table corresponding to the cassette size is detected.
22	The L-cassette and S-cassette positions of the reel table are detected simultaneously.
23	The thread end and unthread end states of the threading ring are detected simultaneously.
92	When the communication between SYS CPU (IC1106 on the SS-101 board) and the device listed below is in abnormal state. CP MPU IC706 on CP-396 board SYS2 MPU IC102, LCD rendering IC201 or IC301, or DPRAM IC405 on SY-340 board EEPROM IC115 or IC116 on FP-153 board.
93	Abnormality in the interface between SV CPU (on SS-101 board) and DR MPU (on DR-508 board) is detected.
95	Abnormality operation of an NV-RAM on FP-153 board is detected.
96	The abnormal operation of an NV-RAM (on FP-153 board) for the system control system is detected.
97	The abnormal operation of an NV-RAM (on DR-508 board) for the servo system is detected.
98	The abnormal operation of the NV-RAM for the RF system (on the EQ-104 board) or NVRAM for video processing system (VPR-98 board) is detected.
99	Abnormality in the interface between SYS CPU (on SS-101 board) and SERVO CPU (on ERROR 2 SS-101 board) or MPU (on APR-80, EQ-104, HPR-21, PD-117, SY-340, TSI-58, or VPR-98 board) is detected.
E0	An error was detected during initialization of network interface (VN-13 board).
E1	A hardware error was detected during data communication via the network.
E2	An error was detected in the file system data stored in the Tele-File label.
E3	A software processing error was detected during data communication via the network.
E4	Communication timeout between SYS CPU (SS-89 board) and VN CPU (VN-13 board) or a hardware error was detected.
E5	FPGA (EPR-1 board) program version does not comply with network operation.