Firewire (i-link) port not working ?
Firewire connection not working
|
|
|
|
|
|
|
Following Equipment is susceptible to fire wire( i-link)
issues. |
|
|
|
Sony Professional Camcorders:
Sony DSR PD100, DSR PD150, DSR PD170, HVRZ1U, HVRV1U, Hvra1u, Hvrz5u, and Hvrz7u.
|
|
|
|
Sony Decks:
DSR11 DSR20 DSR25 DSR30 DSR40 DSR45 DSR50 DSR60
DSR80 dsr85 DSR1500a DSR1600A HVRM15AU HVRM25AU hvrm35u HVR1500A
|
|
|
|
Sony Consumer Camcorders:
HDRFX7 DCR TRV20DSR25 DCR-VX2200E MiniDV Didital
camcorder DCR-VX2100 MiniDV Didital camcorder
DCR-VX2000 MiniDV Didital camcorder DCR SR300
camcorder service DCR DVD305 repair DCR SR87E sony dcr trv280 dcr hv26
|
|
|
|
Panasonic Comcorders and Deckspan>
AG-hvx200 AG-DVX100 A or B AG-dv2500
|
|
|
|
JVC Camcorders or decks
GY-HD200ub GY-hm100 GY-HM700 GY-HM100
GY-HM100U GY-HD2500U decks br-hd50U
|
|
|
Save up to 50% |
TekMedaiGroup has the necessary tools and know-how to repair any firewire-related issues.
We have repaired thousands of such problems successfully by
replacing the (I-link) chip (as compared to replacing the whole board). This technique
not only saves you substantial amounts
of money, it also maintains the factory setup.
|
|
|
Even though the plug and socket will only fit completely together properly in
one direction, there is still power present if either device is powered on. |
Proper I.link connections information |
|
Care must be taken when connecting the i.LINK ( IEEE 1394 / FIREWIRE) into
your PC / MAC Computer or other Device. The i.LINK connector design is
dictated by the IEEE 1394 industry standard and the socket and cable are
constructed with a keyed guide to assist with proper installation. It is
necessary to visually confirm that the plugs and sockets are lined up correctly
for proper installation and to prevent damage to the internal circuitry of the
units.yes" Even though the plug and socket will only fit completely together
properly in one direction, there is still power present if either device is
powered on. color:black"If there is an attempt to insert the plug INCORRECTLY
(wrong polarity) the PC / MAC Computer or other Device can supply power to the
signal pin of the i.LINK. This directly connects to the i.LINK IC and can damage
the circuit. In order to prevent accidental damage, the |
Following steps must be followed |
- Power down the Computer / Device and DVCAM Connect the i.LINK cable to the Computer / Device by visually confirming proper fit and polarity.
- Connect the i.LINK cable to the DVCAM by visually confirming proper fit and
polarity.
- Turn on the power to the Computer / Device and then the DVCAM
- Please review these instructions carefully
- Damage to the DVCAM i.LINK components caused by improper installation is not
covered by Tekmg warranty.
|